r07ds0824ej0500 rev.5.00 page 1 of 3 nov. 06, 2015 datasheet rjp65s07dwa / rjp65s07dws 650v - 150a - igbt application: inverter features ? low collector to emitter saturation voltage v ce(sat) = 1.5 v typ. (at i c = 150 a, v ge = 15 v, tc = 25 ? c) ? high speed switching ? short circuit withstands time (10 ? s min.) outline 1. gate 2. collector (the back) 3. emitter die: rjp65s07dwt-80 wafer: rjp65s07dwa-80 2 c 2 1 g e 3 1 3 3 3 3 absolute maximum ratings (tc = 25c unless otherwise noted) item symbol ratings unit collector to emitter voltage v ces 650 v gate to emitter voltage v ges 30 v collector current tc = 25c i c 300 a tc = 100c i c 150 a junction temperature tj 175 note1 ? c notes: 1. please use this device in the thermal condit ions where the junction temperature does not exceed 175 ? c. igbt application note is disclosed about reliabili ty test and application condition up to tj = 175 ? c. r07ds0824ej0500 rev.5.00 nov. 06, 2015
rjp65s07dwa / rjp65s07dws r07ds0824ej0500 rev.5.00 page 2 of 3 nov. 06, 2015 electrical characteristics (datas below are measured values on a package configuration.) (tc = 25c unless otherwise noted) item symbol min typ max unit test conditions zero gate voltage collector current i ces ? ? 1 ? a v ce = 650 v, v ge = 0 gate to emitter leak current i ges ? ? 1 ? a v ge = 30 v, v ce = 0 gate to emitter cutoff voltage v ge(off) 5.0 ? 6.8 v v ce = 10 v, i c = 3 ma collector to emitter saturation voltage v ce(sat) ? 1.5 1.8 v i c = 150 a, v ge = 15 v note2 input capacitance cies ? 12500 ? pf v ce = 25 v v ge = 0 f = 1 mhz output capacitance coes ? 500 ? pf reveres transfer capacitance cres ? 400 ? pf total gate charge qg ? 730 ? nc ? v ge = 15 v v ce = 300 v i c = 150 a gate to emitter charge qge ? 100 ? nc ? gate to collector charge qgc ? 350 ? nc ? switching time note3 t d(on) ? 90 ? ns v cc = 300 v i c = 150 a v ge = 15 v rg = 10 ? , tc = 150 ? c inductive load t r ? 100 ? ns t d(off) ? 530 ? ns t f ? 70 ? ns short circuit withstand time note4 t sc 10 ? ? ? s v cc ? 360 v , v ge = 15 v tc = 150 ? c notes: 2. pulse test. 3. switching time test circuit and waveform are shown below. 4. verified by design. switching time test circuit waveform diode clamp d.u.t rg l v cc t d(off) t d(on) t f t r 90% 90% 90% 10% 10% 10% v ge i c
rjp65s07dwa / rjp65s07dws r07ds0824ej0500 rev.5.00 page 3 of 3 nov. 06, 2015 die dimension unit: mm illustration part of white part of dotted line part of gray note 1. note 2. the back of the chip is processed with au evaporation. note 3. recognition, target and any other patterns which are not related to diode operation, may be changed without notice. definition al pattern bonding area final passivation 9.3 7.96 1.31 9.3 1.66 1.66 1.66 1.66 0.81 6.59 emitter bonding pad (4) emitter bonding pad (3) emitter bonding pad (2) emitter bonding pad (1) gate bonding pad 1.23 1.23 ordering information orderable part number shipment form rjp65s07dwa-80#w0 unsawn wafer RJP65S07DWS-80#w0 sawn wafer
notice 1. descriptions of circuits, software and other related information in this document are provided only to illustrate the operati on of semiconductor products and application examples. you are fully responsible for the incorporation of these circuits, software, and information in the design of your equipment. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from the use of these circuits, software, or information. 2. renesas electronics has used reasonable care in preparing the information included in this document, but renesas electronics does not warrant that such information is error free. renesas electronics assumes no liability whatsoever for any damages incurred by you resulting from errors in or omissions from the information incl uded herein. 3. renesas electronics does not assume any liability for infringement of patents, copyrights, or other intellectual property rig hts of third parties by or arising from the use of renesas electronics products or technical information described in this document. no license, express, implied or otherwise, is granted hereby under any paten ts, copyrights or other intellectual property rights of renesas electronics or others. 4. you should not alter, modify, copy, or otherwise misappropriate any renesas electronics product, whether in whole or in part. renesas electronics assumes no responsibility for any losses incurred by you or third parties arising from such alteration, modification, copy or otherwise misappropriation of renesas electronics product. 5. renesas electronics products are classified according to the following two quality grades: "standard" and "high quality". th e recommended applications for each renesas electronics product depends on the product's quality grade, as indicated below. "standard": computers; office equipment; communications equipment; test and measurement equipment; audio and visual equipment; home electronic appliances; machine tools; personal electronic equipment; and industrial robots etc. "high quality": transportation equipment (automobiles, trains, ships, etc.); traffic control systems; anti-disaster systems; an ti-crime systems; and safety equipment etc. renesas electronics products are neither intended nor authorized for use in products or systems that may pose a direct threat t o human life or bodily injury (artificial life support devices or systems, surgical implantations etc.), or may cause serious property damages (nuclear reactor control systems, military equipment etc.). you mus t check the quality grade of each renesas electronics product before using it in a particular application. you may not use any renesas electronics product for any application for which it is not intended. renesas electronics shall not be in any way liable for any damages or losses incurred by you or third parties arising from the use of any renesas electronics product for which the product is not intended by renesas electronics. 6. you should use the renesas electronics products described in this document within the range specified by renesas electronics, especially with respect to the maximum rating, operating supply voltage range, movement power voltage range, heat radiation characteristics, installation and other product characteristics. renesas e lectronics shall have no liability for malfunctions or damages arising out of the use of renesas electronics products beyond such specified ranges. 7. although renesas electronics endeavors to improve the quality and reliability of its products, semiconductor products have sp ecific characteristics such as the occurrence of failure at a certain rate and malfunctions under certain use conditions. further, renesas electronics products are not subject to radiation resistance desig n. please be sure to implement safety measures to guard them against the possibility of physical injury, and injury or damage caused by fire in the event of the failure of a renesas electronics produc t, such as safety design for hardware and software including but not limited to redundancy, fire control and malfunction prevention, appropriate treatment for aging degradation or any other appropriate measu res. because the evaluation of microcomputer software alone is very difficult, please evaluate the safety of the final products or systems manufactured by you. 8. please contact a renesas electronics sales office for details as to environmental matters such as the environmental compatibi lity of each renesas electronics product. please use renesas electronics products in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances, in cluding without limitation, the eu rohs directive. renesas electronics assumes no liability for damages or losses occurring as a result of your noncompliance with applicable laws and regulations. 9. renesas electronics products and technology may not be used for or incorporated into any products or systems whose manufactur e, use, or sale is prohibited under any applicable domestic or foreign laws or regulations. you should not use renesas electronics products or technology described in this document for any purpose relating to military applications or use by the military, including but not limited to the development of weapons of mass destruction. when exporting the renesas electronics products or technology described in this do cument, you should comply with the applicable export control laws and regulations and follow the procedures required by such laws and regulations. 10. it is the responsibility of the buyer or distributor of renesas electronics products, who distributes, disposes of, or other wise places the product with a third party, to notify such third party in advance of the contents and conditions set forth in this document, renesas electronics assumes no responsibility for any losses incurred by yo u or third parties as a result of unauthorized use of renesas electronics products. 11. this document may not be reproduced or duplicated in any form, in whole or in part, without prior written consent of renesas electronics. 12. please contact a renesas electronics sales office if you have any questions regarding the information contained in this docu ment or renesas electronics products, or if you have any other inquiries. (note 1) "renesas electronics" as used in this document means renesas electronics corporation and also includes its majority-own ed subsidiaries. (note 2) "renesas electronics product(s)" means any product developed or manufactured by or for renesas electronics. http://www.renesas.com refer to "http://www.renesas.com/" for the latest and detailed information. renesas electronics america inc. 2801 scott boulevard santa clara, ca 95050-2549, u.s.a. tel: +1-408-588-6000, fax: +1-408-588-6130 renesas electronics canada limited 9251 yonge street, suite 8309 richmond hill, ontario canada l4c 9t3 tel: +1-905-237-2004 renesas electronics europe limited dukes meadow, millboard road, bourne end, buckinghamshire, sl8 5fh, u.k tel: +44-1628-585-100, fax: +44-1628-585-900 renesas electronics europe gmbh arcadiastrasse 10, 40472 dsseldorf, germany tel: +49-211-6503-0, fax: +49-211-6503-1327 renesas electronics (china) co., ltd. room 1709, quantum plaza, no.27 zhichunlu haidian district, beijing 100191, p.r.china tel: +86-10-8235-1155, fax: +86-10-8235-7679 renesas electronics (shanghai) co., ltd. unit 301, tower a, central towers, 555 langao road, putuo district, shanghai, p. r. china 200333 tel: +86-21-2226-0888, fax: +86-21-2226-0999 renesas electronics hong kong limited unit 1601-1611, 16/f., tower 2, grand century place, 193 prince edward road west, mongkok, kowloon, hong kong tel: +852-2265-6688, fax: +852 2886-9022 renesas electronics taiwan co., ltd. 13f, no. 363, fu shing north road, taipei 10543, taiwan tel: +886-2-8175-9600, fax: +886 2-8175-9670 renesas electronics singapore pte. ltd. 80 bendemeer road, unit #06-02 hyflux innovation centre, singapore 339949 tel: +65-6213-0200, fax: +65-6213-0300 renesas electronics malaysia sdn.bhd. unit 1207, block b, menara amcorp, amcorp trade centre, no. 18, jln persiaran barat, 46050 petaling jaya, selangor darul ehsan, malaysia tel: +60-3-7955-9390, fax: +60-3-7955-9510 renesas electronics india pvt. ltd. no.777c, 100 feet road, hal ii stage, indiranagar, bangalore, india tel: +91-80-67208700, fax: +91-80-67208777 renesas electronics korea co., ltd. 12f., 234 teheran-ro, gangnam-gu, seoul, 135-080, korea tel: +82-2-558-3737, fax: +82-2-558-5141 sales offices ? 2015 renesas electronics corporation. all rights reserved. colophon 5.0
|
